FlashServer HA-4000 Series. Needs only one copy of operating systems and application software – use just like any Intel server.
- Continuous Availability for 99.999% uptime
- Transparent application failover with no data loss—applications keep running after hardware failures
- Affordable fault tolerance
- Perfect for mission critical applications
- Deploys like a standard Intel server
- Live updates with split and resync (Windows)
- Field-proven in mission critical environments
- Cuts downtime and data loss
- Single software licensing
- Avoids professional services
- Eliminates software clustering
- Dual active servers each with Intel Xeon processors up to 10 cores and 512GB RAM
- Simultaneous application execution on both servers
- Immediate server failover
- Hot swap server replacement
- Works in native and virtual environments
- Supports Windows, Linux and VMware
High Availability Servers for Your Most Important Applications
FlashServer HA Redundant Failover Servers provide an innovative hardware solution to address planned and unplanned downtime for your most important applications. FlashServer HA delivers continuous uptime through its fully redundant modular hardware featuring Intel Xeon E5 processors with up to ten cores each. These servers provide continuous availability through hardware redundancy in all components: CPU, memory, motherboards, I/O, hard disk drives, power supplies and cooling fans. Two servers in one unit run applications simultaneously so if one fails, the other takes over immediately with no lost data and no delays common to cluster solutions. Best of all, only one set of software licenses is needed, delivering big savings compared to cluster software solutions.
Five 9s Reliability
Failover with the FlashServer HA is automatic and transparent to the OS, virtualization software, applications, and users. The environment can survive a drive, motherboard, CPU, RAM, bus, power supply and fan failure. The result is a realizable 99.999% uptime without clustering. For the utmost in reliability and to protect against both hardware and software failures, FlashServer HA servers work exceeding well in cluster environments—delivering a double layer of protection: fault tolerant servers and cluster failover. Plus, clustering provides load balancing and other benefits.
Overwhelming Cost Savings
To run in redundant mode, the HA Server requires only one copy of the operating system and application software; no professional services are needed to setup or configure the server. It’s simple to setup, simple to use, and simple to maintain.
FlashServer HA installs just like any other standard Intel server, saving tremendously on professional services and reducing—or eliminating—the need for specialized staff to support complex cluster environments. FlashServer HA implements server redundancy at the hardware level, reducing failures to automatic notifications and indicator light status. This approach significantly reduces the complexity associated with other forms of high availability such as server clustering. It also simplifies system management and recovery operations, since administration and configurations are performed from a single-system view.
Eliminating minutes of downtime for a cluster failover and avoiding a data loss provide substantial recapture of otherwise lost revenue often measured in thousands of dollars per minute.
FlashServer HA – High Availability Models
|Number and Type of Processors||1 six-core E5-2620 v2||2 six-core E5-2620 v2||1 ten-core E5-2670 v2||2 ten-core E5-2670 v2|
|Processor Speed||2.1 GHz||2.1 GHz||2.5 GHz||2.5 GHz|
|Memory Capacity (DDR3)||16 GB expandable to 128 GB||16GB expandable to 256 GB||16 GB expandable to 256 GB||16 GB expandable to 512 GB|
|Memory Speed||1,600 MHz||1,600 MHz||1,600 MHz||1,600 MHz|
4 x 1GbE (RJ-45, 2 per module)
4 x 10GbE (RJ-45, 2 per module)
Windows Server 2008 R2, Windows Server 2012 R2 (including Hyper-V on each)
|VMware Version||VMware ESXi 5.1 and 5.5|
|Red Hat Linux Version||Red Hat RHEL 6.4 and 6.5 for Intel Servers|
|Fibre Channel Support||FC8 Host Bus Adapters|
|Internal Disks||Up to 16 SAS HDD or SSD Disks (8 per module, mirrored across modules)|
|External Storage||FlashDisk and/or FlashNAS ZFS Storage with Snapshots, Mirroring, Replication, Thin Provisioning and more|
|Standard Warranty||Three year factory warranty and toll free hotline during business hours|
|Additional Service Options||On-site install; 24×7 hotline; On-site service, spares; Advance parts replacement; Custom programs for classified sites.|